Fish-N-Mate 692 Surf-Mate 10-Rod Cooler Rack

Fish-N-Mate 692 Surf-Mate 10-Rod Cooler Rack

**Cart with rod holders included. Other accessories pictured not included, for visual representation only.**

Price: $489.99
Qty:

Oversize Item - This item is oversized and certain shipping methods are excluded, such as free shipping promotions.
Price Match Guarantee
Model
TD Code
DescriptionIncludedDimensionsFinishPrice
692
FNM-0067
692 Surf-Mate 10-Rod Cooler Rack
  • (10) Tube Rod Holders
  • Cooler Rack
  • 18in x 38in Interior Space
  • Holds 120qt Cooler
Bright Anodized Aluminum$489.99 USD
Qty:
Price Match Guarantee
Oversize

The Fish-N-Mate 692 Surf-Mate 10-Rod Cooler Rack is a great addition to your fishing truck, whether you are cruising the beaches or heading to the boat. Its 10 rod tubes are adjustable for different heights and angles to keep them from hitting one another, while large center tray is perfect for the cooler, beach chairs and more. Nylon caps assist with the protection and security of your setups, while an included stabilizer bar mitigates the rattle and movement in your front or rear mounted receiver hitch. Constructed of aluminum and finished with a bright anodized finish, this rack system is corrosion and rust resistant, requiring very little maintenance for seasons to come.

  • (10) Included Rod Tubes that Adjust for Height and Angle (Additional Tubes Available for Separate Purchase)
  • Holds Up to a 120qt Cooler
  • Bright Anodized Finish
  • High Grade Aluminum Tubing
  • Nylon Caps for Added Protection and Securement
  • Mounts to 2in Receivers
  • 18in x 38in Inside Rack Frame Dimensions
4 Stars based on 1 reviews
By Chris
Springfield, VA
Life changing, with a few improvements
May 29, 2015
If you've got a front hitch installed, this thing is the way to go! I really wanted to be able to keep my rods and coolers on the front of the truck instead of having just a rod rack on the front of the truck and backing in to the beach so I can use the tailgate for the cooler. This left my expensive rods hanging out at the front of the vehicle and easy to take. This rack is great. Now everything is in my sight all the time, I can easily rig rods up, change out tackle, cut bait on the bait board accessory, 'spike' a rod in the rack and sit in the truck to get out of the sun,rain,wind, etc. and still be looking towards the water.
Pros
  • Puts everything exactly where you need it. You can run one big cooler, or like I've got two igloo 25 quart coolers and a 6 gallon fresh water container. One igloo cooler is for bait, and I use the other cooler as dry storage for tackle and weights,, a place to keep a drink out of the sun, holds my line if I need to re-spool a reel, whatever I need so I'm not running back and forth to the bed of the truck. I keep a food/drink cooler and a caught fish cooler in the bed since I don't need access to that stuff all the time.
Cons
  • The 'stabilizer bar' that is supposed to take the wiggle out of the hitch is absolutely useless. It's a nice decoration, but it doesn't remove any of the slop. There's also some play in the joint between the piece that goes into the hitch and the actual rack that gets bolted to that. I used some straps to try and tighten things up, wrapping them around some frame parts under the hood, which worked ok. I'm not sure I trust the 200lb weight limit suggestion either. It made me nervous to run up and down the beach with a full load up front. It'll probably handle it, but it made me feel better to move my fresh water container to the bed when it was full. I also wish it was able to adjust up another couple of inches to get the cutting board at a more comfortable height.
4 Questions & 4 Answers
mark camper
from Salem Va. asked:
February 7, 2017
need inside measurements width and length of cooler rack
1 Answer
18" x 38" inside frame dimensions
Submitted by: John on February 8, 2017

Brad Kellmyer
from NJ asked:
July 11, 2022
Does the hitch receiver come with the purchase of the cooler rack?
1 Answer
Hello Brad, 

The Fish-N-Mate cooler rack 692 does not come with a hitch receiver 

Submitted by: Bernie - TackleDirect Customer Service on July 12, 2022

Charles Cutchin
from VIRGINIA asked:
January 24, 2022
Is the vertical height adjustable?
1 Answer
Hi Charles, The Fish-N-Mate 692 Surf Mate 10 Rod Cooler Rack is meant to be attached onto a trailer hitch. The rod holders are not adjustable and in a fixed postion with this rod rack. Please let us know if theres anything else we can assist you with. Tight Lines.
Submitted by: Brendan - TackleDirect Customer Service on January 25, 2022

David
from Sand Springs, Ok asked:
August 31, 2014
I've always been a freshwater fishermen and love the lake flats with homemade PVC sand spikes. Now I'm moving to the coast and know absolutely nothing, but hope to learn how to surf fish. Are these items meant to be used such as sand spikes, or just for transportation? If it is for fishing, then how/why would you fish 10 or even 3 rods so close together?
1 Answer
These are for transportation and rigging. For actual fishing, you would need sand spikes.
Submitted by: Customer Service on September 1, 2014

#HookedOnTD

Show off your fishing gear investment. Please post images and videos of your fishing gear, apparel, catches and lifestyle shots on and off the water. Let's see what you've got for a chance to win FREE gear! You can use #HookedOnTD or UPLOAD YOUR IMAGE HERE to make it onto our product pages or gallery. See something you like? You can shop directly from the images we post when gear we sell is featured!